L-36.com

Dimensions of King's cruiser 33

Updated 10/25/2012



Selected Measurements for King's cruiser 33

BOAT
I
J
P
E
ISP
JSP
PY
EY
Disp
LWL
DRAFT
King's cruiser 33 41.4 11.5 36.9 11 0 0 0 0 9480 24 5.67

Links to our Multi Vendor Used Sail Directory for King's cruiser 33

Other Data Base Entries for king*

Click on boat nane to use
BOAT   I J P E ISP SPL PY PELWLDRAFTDISP
KING'S CRUISER 28   25 11.5 29 11 193.92 5070
KING'S CRUISER 33 41.4 11.5 36.9 11 245.67 9480
KINGS CRUISER 29 25 6.5 29 11.5 25 6.5
KINGS CRUISER 33 41.4 11.5 36.9 11 41.4 11.5
Kings Crus 29 Fg 25 6.5 29 11.5
Mockingbird 36   38 12.75 32.33 14.5 38 12.75
Mockingbird 36 Ctr 38 12.78 32.33 14.9 24.55.520000
VIKING 22   24 7.5 23.8 9.8
VIKING 22 24 7.5 23.8 9.8 17.53.75 1700
Viking 22 24 7.5 23.8 9.8 17.53.81700
VIKING 22 24 7.5 23.8 9.8 24 7.5
VIKING 25 27 8 31.4 10.8
VIKING 25 27 8 31.4 10.8 194 3500
Viking 25 27 8 31.4 10.8 1943500
VIKING 25 27 8 31.4 10.8 27 8
VIKING 28 32.3 10.5 27.3 10.8 224.5 4775
VIKING 28 32.5 10.5 27.3 10.8 32.5 10.5
VIKING 28 32.5 10.5 27.5 11
Viking 28 Ib 32.5 10.5 27.3 10.8 224.5
Viking 28 Ob 32.3 10.5 27.3 10.8 224.54775
VIKING 31 24.11 7.22 32.81 13.29 20.674.76 6283
VIKING 33 42.5 15 37.5 10.5
VIKING 33 42.8 15 37.8 10.5 27.175.58807
Viking 33 42.8 15 37.8 10.5 27.175.58807
VIKING 33 42.8 15 37.8 10.5 42.8 15
Viking 33 Tm 44.6 14.75 39.3 10.7 27.55.58800
Viking 34 44.5 14.75 39.34 10.75 288900
VIKING 34 44.5 14.8 39.3 10.7
VIKING 34 44.5 14.8 39.3 10.7 27.1768900
VIKING 34 44.5 14.8 39.3 10.8 44.5 14.8
Viking 34 T 44.67 14.75 39.9 10.7 27.568900
Viking 34 Tm 44.5 14.8 39.3 10.7 27.568900
Click Here for other boat types or to check dimensions from other data bases. We now offer three data bases.

Sail Area Calculations

BOAT
I
J
P
E
ISP
JSP
PY
EY
Disp
LWL
DRAFT
King's cruiser 33 41.4 11.5 36.9 11 41.4 11.5 0 0 9480 24 5.67

sailboat rig dimensions The following formulas are approximate
Sail areas depend on lots of factors, leach hollow, foot round, luff hollow etc. Also, remember that jib sail area in general is based on the forestay length, I. But all things considered, these numbers are close but should not be considered exact. They are rules of thumb, not measurements of a this specific boat.

Mainsail

Mainsail = (P x E) / 2 = 203 sq ft
Racing Mainsail (add 10%) = 223 sq ft

Genoa

155% Genoa = (( J x I ) / 2) x 1.65 = 393 sq ft
135% Genoa = (( J x I ) / 2) x 1.44 = 343 sq ft

Jib

  _______
LP of full fore triangle = ( I x J ) / √  I2 + J2 = 11.1
Jib size to fill fore triangle = 97%
100% Jib = ( I x J ) / 2 = 238 sq ft

A more accurate LP calculator is HERE

Spinnaker

Spinnaker Area = Max Luff x Max Girth x ( 70-85%) = 591 to 718 sq ft
"Square" Spinnaker Area = Max Luff x Max Girth) = 845 sq ft
AC Area = 704 sq ft
Maximum Luff (.95 * sqrt (JSP^2 + ISP^2) = 40.82 feet
Maximum Girth = 1.8 * JSP = 20.7 feet
Ref

DEFINITIONS

"P" is the luff length of the mainsail, measured along the aft face of the mast from the top of the boom to the highest point that the mainsail can be hoisted or black band.

"E" is the foot length of the mainsail, measured along the boom from the aft face of the mast to the outermost point on the boom to which the main can be pulled or to the black band.

"I" is measured along the front of mast from the genoa halyard to the main deck. The main deck is where the deck would be if there were no deckhouse.

"J" is the base of the foretriangle measured along the deck from the headstay pin to the front of the mast.

"JSP" is the length of the spinnaker pole or the distance from the forward end of the bowsprit (fully extended) to the front face of the mast.

"ISP" is measured from the highest spinnaker halyard to the deck.

"PY" and "EY" are, respectively the luff length and foot length of the mizzen of a yawl or ketch measured in the same way as for the mainsail.

"IY" is the measurement from the staysail halyard to the deck.

"JY" is the measurement from the staysail stay to the front face of the mast.

"LP" is the shortest distance between the clew and the luff of the genoa.


Data*

This data is supplied as a reference and all boat dimensions should be verified before using it in any critical application.
The information in these data bases is a starting point. There are errors as you can see as the different data bases do not always agree. In addition, some boats have been modified from stock and will not match the data in these databases. None of this data has been checked by L-36.com so please always check your boat before relying on this data.
Data is from a variety of sources.
db = SBD is used under the Creative Commons License sailboatdata.com (sailboatdata.com) / CC BY 3.0
db = PHRF is the PHRF Critical Dimensions database
db = WEB is the commonly available data found on many web sites
db = BIG is a combination of all of the above.


NOTICE: Some pages have affiliate links to Amazon. As an Amazon Associate, I earn from qualifying purchases. Please read website Cookie, Privacy, and Disclamers by clicking HERE. To contact me click HERE. For my YouTube page click HERE